Step 5: Running The Test; Step 6: Viewing The Results; Step 7: Saving The Results - Fluke OF-500-01 OptiFiber Technical Reference Handbook

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook

Step 5: Running the Test

5-1 Make the connections for a Smart Remote mode test,
as shown in Figure 2-4. Connect the main unit to the
cabling end identified as END 1 on the Job tab.
T
5-2 Press .

Step 6: Viewing the Results

The tester offers the following views of loss/length test
results:
6-1 The SUMMARY screen, shown when the test is
finished, tells you if the cabling passed or failed based
on the selected test limits.
6-2 To see more details about the cabling, press
Results.
See Chapter 6 for details on loss/length results.
2-20

Step 7: Saving the Results

The tester saves Smart Remote test results in two
separate records. One record is used for each fiber.
7-1 Press
7-2 If the tester shows a text editing screen, press
ID to access the fiber ID list you configured.
7-3 The tester highlights the first unused ID in the
UNUSED AUTO SEQUENCE IDs list. Press s to save
the results from one fiber.
7-4 Press s again to save the results from the second
fiber, using the next ID in the list.
A
View
This concludes the tutorial on using the loss/length option.
See Chapter 6 for additional information on the loss/length
option.
Note
s
.
A
Pick