Checking The Software And Hardware Versions; Using The Online Help - Fluke OF-500-01 OptiFiber Technical Reference Handbook

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook

Checking the Software and Hardware Versions

To see the tester's software and hardware versions press
E
Version Info. from the HOME screen.
The VERSION screen shows the software and hardware
versions and serial numbers of the tester and the installed
module.
The software version information includes the date the
software was compiled at the factory.
To determine if your tester needs a software update visit
the Fluke Networks website to see if an update is available.
If "Unknown" is shown for the module software version
the module software is probably quite old. Update the
module software to the latest version.
The module information includes the date the module last
received calibration at a Fluke Networks service center. The
tester requires a traceable calibration at a Fluke Networks
service center once a year to ensure that it meets or exceeds
the published accuracy specifications.
1-20

Using the Online Help

H
When you press , the tester shows a help topic that
relates to the current screen. Blue, underlined words are
links to other topics.
The help files are stored in the mainframe (rather
than the module) and may describe features not
present in the installed module.
To go to a linked topic (blue, underlined words) use K N to
highlight the words; then press
To see an index of all help topics press
in the help system.
Tip: The highlighted area cycles through the links on the
current screen if you continue to press the left or right
arrow key.
Note
t
.
H
any time you are