The heat sink fins and brake resistor (dedicated option) can reach high
●
temperatures, so allow to cool before touching.
Doing so could lead to burns.
The inverter can be easily set to run from low speeds to high speeds.
●
Confirm the tolerable range of the motor and machine before starting
operation.
Failure to do so could lead to injury.
Prepare holding brakes when required.
●
Failure to do so could lead to injury.
4. MAINTENANCE, INSPECTION AND PART REPLACEMENT
Wait at least five minutes after turning the input power OFF before starting
●
inspections.
Failure to do so could lead to electric shock.
Maintenance, inspection and part replacement must be done by qualified
●
persons.
[Remove all metal personal belongings (watches, bracelets, etc.) before
starting the work.] (Use tools treated with insulation.)
Failure to do so could lead to electric shocks or injury.
Have an electrician periodically tighten the terminal screws.
●
Loosening of the terminal screws could lead to overheating or fire.
Downloaded from
www.Manualslib.com
!
!
manuals search engine
ATTENTION
ATTENTION
!
ATTENTION
6