Panasonic VF0 Series Instruction Manual page 20

Connected device, wire size and main circuit terminal tightening
torque
Inverter capacity
Note 1) If the breaker's overcurrent trip is a magnetic type, the device
Note 2) When using an installed circuit breaker with motor protection,
Note 3) Crimp connectors used must be ring terminals.
19
Downloaded from www.Manualslib.com
Circuit breaker
(MCCB)
0.75 kW
1.5 kW
2.2 kW
3.7 kW
could overheat due to higher harmonics. Use a load rate of 50% or
less in this case.
remove it.
manuals search engine
Tightening torque
5A
10A
1.2 N·m
(12.2 kgf·cm)
15A
20A
Wire size
2
2mm
(14AWG)