Panasonic VF0 Series Instruction Manual page 63

PASSWORD (Parameter P65)
A password can be set to prevent unintentional changes to the parameter data after it has
been set.
Data setting range
[Procedures for changing parameter data after setting password]
∗ Example when password is set to "777"
STOP
MODE
SET
∗ After this step, the data is changed with the normal changing procedures.
Note) After the parameter is set, the "function setting mode" cannot be called without
Downloaded from www.Manualslib.com
000 • 1 to 999
("000" indicates that there is no password.)
Press the STOP button to stop the inverter.
When the MODE button is pressed three times, the password input
display (PS) will appear, and the main display will flicker.
Press the (up) and (down) buttons to display the previously set
password. (The main display will flicker.)
The parameter No. will appear when the SET button is pressed.
inputting the password. (Write down the password so that you do not forget it.)
manuals search engine
F r d r
Main display
0 0 0
P S
7 7 7
P 0 1
62