Panasonic VF0 Series Instruction Manual page 6

3. OPERATION
Always close the terminal cover before turning the input power ON. Do not
●
open the terminal cover while the power is ON.
Doing so could lead to electric shock.
Do not operate the switches with wet hands.
●
Doing so could lead to electric shock.
Do not touch the inverter terminals when the inverter power is ON or even
●
when the inverter is stopped.
Doing so could lead to electric shock.
The STOP button is not designed for emergency stop purposes. Prepare
●
a separate emergency stop button.
Failure to do so could lead to injury.
Depending on the start mode and ride-through function settings, if the run
●
signal is on and the power is turned ON or the power is restored after a
power failure, the unit may start (restart) suddenly. Bear this in mind
before conducting maintenance.
(Design the machine so that personel safety can be ensured even if the
unit starts suddenly.)
Failure to do so could lead to injury.
Depending on the start mode function setting, if the fault trip is reset with
●
the run signal present, the unit may restart suddenly.
(Reset the trip after ensuring personel safety.)
Failure to do so could lead to injury.
When the retry function is used, the unit may automatically start (restart)
●
suddenly so do not approach the unit.
(Secure personal safety before using this function.)
Failure to do so could lead to injury
5
Downloaded from www.Manualslib.com
！
manuals search engine
ATTENTION