Panasonic VF0 Series Instruction Manual page 30

[Continued from previous page, Example to rotate in reverse at operating frequency 50Hz]
Changing
the
rotation
direction
Run
command
Changing
the
rotation
direction
Stop
command
Operating with the operation panel - 4
● ● ● ●
· Forward/reverse run operation:
· Frequency setting: Digital setting (Parameter P09=1)
1. Carry out the same operation as "Operating with the operation panel - 2" for
forward run/reverse run, stopping.
2. Carry out the same operations as "Operating with the operation panel - 3"
to set and change the frequency.
Note 1) The rotation direction cannot be set with the "rotation direction setting
Note 2) The MOP function cannot be used with this Operating with the
29
Downloaded from www.Manualslib.com
MODE Press the MODE button.
MODE
Press the MODE button.
Press the SET button. (The main display will flicker)
SET
Press the
Press the SET button to set the data.
SET
Press the RUN button.
RUN
As the frequency is already set to 50Hz, the motor will start
rotating in the reverse direction and will reach 50Hz in approx. 5
seconds.
[Example to change to forward rotation during reverse rotation]
MODE Press the MODE button.
MODE Press the MODE button.
SET Press the SET button. (The main display will flicker)
Press the
Press the SET button.
SET
The motor will decelerate, and will start forward
rotation at 50Hz.
[Stopping operation]
Press the STOP button.
STOP
The motor will start to decelerate and will stop in approx. 5
seconds.
mode (dr)" in this Operating with the operation panel - 4. In the
"rotation direction setting mode (dr)", only the rotation direction and
local/external operation control state can be monitored.
operation panel - 4.
manuals search engine
(up) button. (The main display will flicker)
(down) button. (The main display will flicker)
Forward run/reverse run (Parameter P08=1)
Main display
F r
d r

L F

L r
0 0 0
5 0. 0
F r
d r

L r

L F
Reverse run
0. 0
5
0. 0
0. 0
Forward run 5
0 0 0