Panasonic VF0 Series Instruction Manual page 3

1. PREFACE
Important information relative to this manual
# Manufactures and their respective engineering departments responsible for
design and specification of electrical control equipment must refer to applicable
industry standards and codes for specific safety guidelines and interface
requirements.
# The installer/user of this product is responsible to assume compliance with
appropriate machine and operator safety codes or regulations within the factory
environment which are beyond the scope and purpose of this documents.
General precautions
Added to the precautions listed within this document.
The following statements common to the system must be read and understood.
！
ATTENTION ; Only qualified personnel familiar with the VF0 and its
application should plan, install, start up or maintain the system.
Failure to comply may result in personal injury and/or equipment damage.
！
ATTENTION ; This assembly contains parts that may be sensitive to static
discharge. Static control precautions will be required if performing repairs,
tests or servicing of this equipment otherwise component damage may
result.
！
ATTENTION ; A product that has been incorrectly applied or installed could
result in component damage and a reduction in product life. Malfunction of
system may be as a result of wiring or application errors, such as incorrect
or inadequate AC supply, excessive temperature or an undersized motor.
Downloaded from www.Manualslib.com manuals search engine
2