Panasonic VF0 Series Instruction Manual page 61

MONITOR SELECT and LINE SPEED MULTIPLIER
Used to select the details of the operation panel's main display.
[Parameter P60: Monitor details selection]
[Parameter P61: Line speed multiplier setting]
Data setting range
[Example: Display line speed ] ⇒ Line speed (m/min) = F (Hz) × K (multiplier)
· To display the line speed 25 (m/min) for 50Hz, set the multiplier (K) to "0.5".
MAX. OUTPUT VOLTAGE (Parameter P62)
Used to set the max. output voltage.
Data setting range (V)
Note 1) A voltage exceeding the power voltage
Note 2) This setting does not affect the DC
Downloaded from www.Manualslib.com
Data setting value Details displayed on operation panel
0
1
Used to set the multiplier with respect to the frequency when the line speed is displayed
on the operation panel's main display.
0.1 to 100 (can be set in 0.1 units)
Note) A line speed exceeding "999" cannot be displayed.
(The 4-pole motor speed cannot be displayed.)
0 • 1 to 500
(When "0" is set, the power voltage value will be output.)
cannot be output.
brake level.
manuals search engine
(Parameter P60 and P61)
Output frequency
Line speed
Base frequency
Power voltage
Max. output voltage
Output frequency
60