Milling Bur Registration" Dialog Box - Roland DWX-51D User Manual

"Milling bur registration" Dialog Box

A milling bur's registration information can be changed in order to change the work time or the replacement time. When
more than one machine is connected, the milling bur for the machine selected in the top window will be the target.
Display
Milling bur list
Milling bur info
Add milling bur
Remove milling bur
Explanation
Displays the names, work times, and replacement times of the registered milling burs. If
you are using Intelligent Tool Control (a function that can be set on the "Stocker settings"
dialog box), the work time for the milling bur set as the second milling bur is displayed
under Work time <2>.
 P. 14""Stocker settings" Dialog Box"
Allows the milling bur name, work time, and replacement time of the milling bur selected
in the list to be edited. Click "Save" to overwrite and save the edited content.
Because replacement times depend on the type of milling bur or workpiece as well as the
milling conditions, adjust the replacement time value as necessary.
Registers additional milling burs. You can register up to 20 milling burs.
Removes the milling bur selected in the list.
VPanel Window and Functions
1. Operation Screen
13