Maintenance" Tab - Roland DWX-51D User Manual

"Maintenance" Tab

In this tab, you can perform operations related to maintenance, including automatic correction of the milling machine and
system reporting. When more than one machine is connected, the machine selected in the top window becomes the target
for the operations.
Display
Correction
Cleaning Tool
ATC
Spindle
Report
Explanation
Correct the ATC magazine position or the rotary axis position. You can usually use "Automatic
correction."
P. 38"Correcting the Milling Machine"

 P. 11""Manual correction" Dialog Box"
This function is used for cleaning. Push this button to open the Cleaning tool dialog box.
P. 15""Cleaning tool" Dialog Box"

Perform tests, maintenance, and other tasks related to operation with the ATC magazine. The
"Emergency release" button is enabled when the power is turned on while the front cover is
open. Use this function if initialization cannot be performed because, for example, the milling
bur is caught on the workpiece.
 P. 36"Situations Requiring Maintenance"
P. 41"Care and Storage of Detection Pin and Automatic Correction Jig"

This function is used for long-term spindle management. "Work time" displays the work time of
the spindle. After replacing the spindle unit, click "Reset" to reset the value to 0.
 P. 36"Replacing Consumable Parts"
 P. 38"Correcting the Milling Machine"
Displays system reports (including firmware version and total operating hours) and error logs.
Pressing the "Save file" button will collect the machine's log information and save it to a file.
VPanel Window and Functions
1. Operation Screen
9