Aborting Output; Removing Milling Data In Standby From The Output List - Roland DWX-51D User Manual

Aborting Output

Procedure



Removing Milling Data in Standby from the Output List

Procedure

In the top window of VPanel, select the machine to edit from the output list.

In the top window of VPanel, select the machine for
which output will be aborted.
Click .
The message shown in the figure will be displayed.
To abort output, click [OK].
Click [Cancel] to not abort the output.
Right-click the mouse on the milling data to remove
from the output list, and click [Cancel].
Only milling data in standby can be removed (milling data in the
second or following positions from the top of the output list).
Starting Milling
31
2. Milling