Vpanel Window And Functions; Top Window - Roland DWX-51D User Manual

VPanel Window and Functions

Top Window

The top window displays the statuses of connected milling machines and an output list of milling data. Output of milling
data can also be executed in this window.
No. Display
Machine operation status
Name of connected machine
Remaining time graph
Milling bur work time
Milling machine status
Output list
Output a file
Cancel
Milling bur management
Settings
Explanation
: Milling data can be received.
: The power of the milling machine is off.
: Operation is in progress.
: An error has occurred.
: Operation is paused.
: The front cover is open.
: Milling is complete. (Will change to READY if the front cover
is closed.)
Displays the ID and name of the connected machine. The ID of machines
with the power turned off are shown with [-].
If you click the name of a connected milling machine, the status light of the
milling machine will flash. This allows verification of a connected machine
when multiple machines are connected.
The estimated milling time and a progress bar are displayed.
Displays the name of the tool selected in "Tool management," the current
work time, and the time when it must be replaced.
For example, "00h01m/06h00m" indicates that "00h01m" is the work time
and "06h00m" is the replacement time of the tool.
Displays the operation status, spindle speed, milling time, etc. The informa-
tion displayed is for the machine that has the radio button to the left of the
name selected.
Displays the data being milled, the milling data in standby, and the milling
progress.
Outputs milling data.
 P. 27"STEP 3: Outputting Milling Data"
Cancels output of milling dataCancels output of milling data and other
functions.
Allows for registration and selection of milling burs.
P. 12""Milling bur management" Dialog Box"

Displays the SETTINGS window.
 P. 8""Settings" Tab", P. 9""Maintenance" Tab", P. 10""Mail" Tab"
1. Operation Screen
7