Roland DWX-51D User Manual page 28

Starting Milling

Changing the data list order
You can change the output order by selecting the milling data in the data list and clicking
(The milling data is output from the top of the data list.)
Removing milling data from the data list
To remove milling data from the output list, select the milling data in the data list and click "Remove."
Adding milling data by dragging and dropping
You can add milling data by dragging and dropping data on the window displayed in steps

Do not open the front cover during milling. To ensure safety, opening the front cover while data is being output
will cause an emergency stop to occur.

P. 60"Responding to Error Messages"
28
2. Milling
The estimated milling time and a
progress bar are displayed next
to the name of the connected
machine.
Click "Output."

Click [OK].
The output milling data is displayed in the output
list of the top window, and milling starts.
A sound will be emitted when milling has finished.
or .

and .