Maintenance Precautions - Roland DWX-51D User Manual

Maintenance Precautions

Maintenance Precautions

WARNING
WARNING
WARNING
WARNING
CAUTION
 This machine is a precision device. Carry out daily care and maintenance.
 Carefully clean away milling waste. Operating the machine with milling waste present may cause a malfunction.
 Never install in an environment where silicone substances (oil, grease, spray, etc.) are present. Doing so may cause
poor switch contact or ionizer damage.
 Never lubricate any location not specified in this manual.
Never use a pneumatic blower.
This machine is not compatible with a pneumatic blower. Milling waste may get inside the
machine and cause fire or electrical shock.
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause a fire.
Never use a vacuum cleaner to clean up milling waste.
Picking up fine cuttings using an ordinary vacuum cleaner may result in a fire or explosion.
Do not touch the spindle unit or the surrounding areas immediately after milling has
ended.
Doing so may result in burns.
Be careful around the milling tool.
The milling tool is sharp. Broken milling tools are also dangerous. To avoid injury,exercise
caution.
33
3. Maintenance