Settings; Detailed Function Settings (Menu); Backing Up User Data (Backup/Restore); Restoring The Factory Settings (Factory Reset) - Roland FA-06 Quick Start Manual

Settings

Detailed Function Settings (Menu)

1.
Press the [MENU] button.
The MENU screen appears.
2.
Use the cursor buttons to select a menu item, and press
the [ENTER] button.
3.
Edit the settings of the menu item you selected.
MEMO
For details on the contents of each menu item, refer to
"Reference Manual" (PDF).

Backing Up User Data (Backup/Restore)

Here's how all settings stored in this unit's internal memory can be saved to an SD card (backed up), or written back into internal memory
(restored).
Backing Up to SD Card (Backup)
NOTE
If you back up using the same file name as backup data
that already exists on the SD card, the existing data will be
overwritten. Assign a different name if you want to make a new
backup.
1.
In the MENU screen, select "Utility" and press the
[ENTER] button.
The UTILITY screen appears.
2.
Use the cursor buttons to select "Backup," and press the
[ENTER] button.
3.
Press the [2] (Rename) button and assign a name to the
backup file (p. 18).
4.
Press the [7] (Backup) button.
A confirmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
5.
To execute, press the [6] (OK) button.
NOTE
Never turn off the power while the backup is in progress.

Restoring the Factory Settings (Factory Reset)

Here's how you can restore this unit's settings to their factory-set condition (factory reset).
NOTE
When you execute the Factory Reset operation, all data in this unit will be lost. If there is any data that you want to keep, back it up to an SD
card.
1.
In the MENU screen, select "Utility" and press the
[ENTER] button.
2.
Use the cursor buttons to select "Factory Reset," and
press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
26
Menu Explanation
Tone Edit Edit a tone (p. 17).
Effect Edit Edit the effects (p. 18).
Part View View a list of part settings (p. 17).
Make overall settings for the entire studio set (p.
Studio Set Common
17).
Studio Set Init
Initialize a studio set.
Tone List View a list of tones.
Mixer Adjust the pan and the volume balance.
System Make overall settings for the entire this unit.
Utility Back up data or initialize an SD card.
Wireless Make wireless LAN settings.
Restoring Backup Data to This Unit (Restore)
1.
In the UTILITY screen, select "Restore" and press the
[ENTER] button.
2.
Use the cursor buttons to select the file that you want to
restore, and press the [7] (Restore) button.
A confirmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
NOTE
When you execute the restore operation, all settings currently
saved in this unit will be lost. If you want to keep the current
settings, back them up using a different name.
3.
To execute, press the [6] (OK) button.
NOTE
Never turn off the power while the restore is in progress.
4.
Turn the power off, and then on again (p. 9).
3.
To execute, press the [6] (OK) button.
NOTE
• Never turn off the power while the factory reset is in progress.
• Data on the SD card will not return to the factory setting.