Perform Axle Maintenance - Ce - Genie TZ-34/20 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST B PROCEDURES
6 Confi rm that the brake cable is securely
installed into the brake handle linkage.
7 Apply the hand brake.
8 Attempt to manually push the machine.
Result: The machine does not move.
Result: The machine moves. Adjust the brakes.
See Maintenance procedure C-6, Adjust the
Brakes - CE.
Required maintenance procedures and additional
axle information is available in the KNOTT Axle
Service Manual (KNOTT part number P005).
KNOTT Axle Service Manual
Genie part number
3 - 16
B-10

Perform Axle Maintenance - CE

Axle specifi cations require that this procedure be
performed annually or every 5000 km, whichever
comes fi rst.
• Brake Inspection
• Axle Inspection
Required maintenance procedures and additional
axle information is available in the KNOTT Axle
Service Manual (KNOTT part number P005).
84443
KNOTT Axle Service Manual
Genie part number
Genie TZ-34/20
January 2016
84443
Part No. 825934