Genie TZ-34/20 Service Manual page 21

Pre-Delivery Preparation
January 2016
Fundamentals
It is the responsibility of the dealer to perform the
Pre-delivery Preparation.
The Pre-delivery Preparation is performed prior to
each delivery. The inspection is designed to discover if
anything is apparently wrong with a machine before it
is put into service.
A damaged or modifi ed machine must never be used.
If damage or any variation from factory delivered
condition is discovered, the machine must be tagged
and removed from service.
Repairs to the machine may only be made by
a qualifi ed service technician, according to the
manufacturer's specifi cations.
Scheduled maintenance inspections shall be
performed by qualifi ed service technicians, according
to the manufacturer's specifi cations and the
requirements listed in the responsibilities manual.
Terex South Dakota, Inc USA
500 Oak Wood Road
PO Box 1150
Watertown, SD 57201-6150
(605) 882-4000
Part No. 825934
Section 3 • Scheduled Maintenance Procedures
Instructions
Use the operator's manual on your machine.
The Pre-delivery Preparation consists of completing
the Pre-operation Inspection, the Maintenance items
and the Function Tests.
Use this form to record the results. Place a check
in the appropriate box after each part is completed.
Follow the instructions in the operator's manual.
If any inspection receives an N, remove the machine
from service, repair and re-inspect it. After repair,
place a check in the R box.
Legend
Comments
Pre-Delivery Preparation
Pre-operation inspection
completed
Maintenance items completed
Function tests completed
Model
Serial number
Date
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Genie UK
The Maltings, Wharf Road
Grantham, Lincolnshire
NG31- 6BH England
(44) 1476-584333
Genie TZ-34/20
Y = yes, completed
N = no, unable to complete
R = repaired
Y N R
3 - 3