Genie TZ-34/20 Service Manual page 91

January 2016
Item Description
CR Control Relay
CR71 Platform level
CR72 Outrigger
CR73 Function enable (ground controls)
CR74 Function enable (platform controls)
CR75 Level sensor
CR76 Limit switch fault
CR77 Down enable
CR78 Lift cut-out
F Fuse
F6 Function, 275A
FB1 Flashing Beacons (option)
GND Ground
G Gauge
G6 Hour meter
G7 Battery charge indicator (option)
H Horn or Alarm
H1 Horn
H5 Multifunction alarm
KS1 Keyswitch
Part No. 825934
Electrical Abbreviations Legend
Item Description
L Light or LED
L4 Load sense at ground (load sense option)
L4A Load sense at platform (load sense
option)
L12 Left front outrigger
L13 Right front outrigger
L14 Left rear outrigger
L15 Right rear outrigger
L33 Right rear tail light
L34 Left rear tail light
L35 Right side marker
L36 Left side marker
LS Limit Switch
LS12 Left front outrigger
LS13 Right front outrigger
LS14 Left rear outrigger
LS15 Right rear outrigger
LS18 Boom down
LS18A Boom down
LS19 Load sense
M Motor
M5 Hydraulic power unit
N.C. Normally closed
NCHO Normally closed, held open
N.O. Normally Open
NOHC Normally open, held closed
P Power switch
P1 Emergency Stop button at ground controls
P2 Emergency Stop button at plat. controls
Genie TZ-34/20
Section 5 • Schematics
5 - 3