Exchange Server - Polycom CX7000 series Administrator's Manual

Exchange Server

Polycom, Inc.
Standalone
When you sign in using standalone mode, you do not need to sign in to a
domain.
When you use the system in standalone mode, you must install the correct
certificate in the local certificate store. See SECTION for more information.
The following settings are available when you choose the Standalone sign-in
mode.
Setting
Lync Sign-in Address
Password
Specify Microsoft Lync
server
Lync Server Name
Specify time server
Time Server Name
System Name
Admin password
Confirm Password
An administrator account appropriate to your sign-in mode is required to
access these settings:
— Domain Member: local administrator or domain administrator
— Standalone: local administrator
Automatically discover Exchange Web Service Address
Lets the system discover the Exchange service address automatically.
Administrator's Guide for Polycom CX7000 Systems
Description
Lets you specify the Lync address for the system.
Lets you enter the password for the Lync account
assigned to this system.
Lets you choose whether to enter the Lync Server name
manually.
Specifies the Lync server to use.
Lets you choose to enter the time server name
manually.
If you do not specify a time server, the system first
attempts to use DNS SRV to find the time server
address and, then attempts to use time.windows.com
as the time server.
Specifies the time server to use.
Displays the name of the Polycom CX7000 system.
Typically, the Polycom CX7000 system is assigned the
same name as the conference room in which the
system is located.
Enter or change the password for the Polycom CX7000
system.
Lets you reenter the password for the CX7000 system.
39