Table of Contents
Advertisement
Polycom, Inc.
Click System. The settings you see depend on the sign-in mode you chose
4
when the system was set up.
To change the sign-in mode, you must reset the system. To reset the system:
1
Click
Options >
2
Click Advanced Settings and sign in using a domain administrator or an
operator account.
3
Click Reset System.
4
Click Reset System to confirm.
Do one of the following:
5
— Configure these settings if the system is configured to use Domain
Member as the sign-in mode:
Setting
Description
Domain Name
Lets you view the domain name for the system.
Domain Account
Lets you view the Lync account assigned to this system.
Specifies the password for the Lync account assigned
Account Password
to this system
Confirm Password
Lets you reenter the password for the Lync account assigned
to this system.
System Name
Displays the name of the Polycom CX7000 system. Typically,
the Polycom CX7000 system is assigned the same name as
the conference room in which the system is located.
Admin password
Enter or change the password for the Polycom CX7000
system.
Confirm Password
Lets you reenter the password for the system.
— Configure these settings if the system was configured to use
Standalone as the sign-in mode:
Setting
Lync Sign-in Address
Lync User Name
Lync Password
Specify Microsoft Lync
server
Administrator's Guide for Polycom CX7000 Systems
Configuration.
.
Description
Displays the Lync address for the system.
Displays the user name for the Lync account assigned
to this system.
Lets you enter or change the password for the Lync
account assigned to this system.
Lets you choose whether to enter the Lync Server name
manually.
17
Advertisement
Table of Contents
