System Settings - Polycom CX7000 series Administrator's Manual

Administrator's Guide for Polycom CX7000 Systems

System Settings

16
Setting
Subnet Mask
Default Gateway
Obtain DNS Server
address automatically
Use the following DNS
server address
Preferred DNS server
Alternate DNS server
Changing System settings causes the system to restart. Do not power the system
off until the restart is complete.
The sign-in mode you choose determines how the system signs in. The
following table shows the available sign-in modes and the account types
required to use them.
Sign-in Mode
Domain Member
Standalone
Note that the System settings vary depending on the sign-in mode you choose.
To configure System Settings:
Click Options >
1
Click Advanced Settings.
2
Sign in using the administrator account appropriate to your sign-in
3
mode:
— Domain Member: local administrator or domain administrator
— Standalone: local administrator
Description
Specifies the subnet mask for this system.
Specifies the gateway IP address to use If the system
does not automatically obtain one.
Specifies that the system gets a DNS address
automatically.
Specifies that the DNS address is not assigned
automatically.
Specifies the DNS address to use for this system.
Specifies an alternate DNS address to use for this
system.
Accounts Needed
Domain account
Domain account or Lync Online account
Configuration.
Polycom, Inc.