Customizing The Display Behaviors - Polycom CX7000 series Administrator's Manual

Administrator's Guide for Polycom CX7000 Systems

Customizing the Display Behaviors

10
You can customize the video output used when the system goes to sleep. If
your system uses two monitors, you can also customize the system behavior
for systems with two monitors.
To customize the display behaviors:
Click Options >
1
Click Display.
2
Sign in using the administrator account appropriate to your sign-in
3
mode:
— Domain Member: local administrator or domain administrator
— Standalone: local administrator
Configure these settings:
4
Setting Description
Screen Saver Specifies the screen saver output for the monitor when the system
goes to sleep. Choose one of the following:
• None: Prevents the system from entering sleep mode.
• Blank: Displays black video. This is the recommended setting to
prevent burn-in for TV monitors.
• 3D Text: Displays the text you specify in a 3D format. You can
specify up to 20 characters. After 30 minutes, the screen saver
shuts off and the screen remains blank.
Custom Text Lets you enter text to display when the system goes to sleep. This
setting is available when you choose 3D text as the screen saver.
Screen Saver Specifies how long the system remains awake during periods of
Wait Time inactivity.
(minutes)
Show Lets you specify that the calendar displays on Monitor 2. By default,
calendar on the calendar is displayed on Monitor 1.
Monitor 2
This option is available only when two monitors are connected to
your system.
Change cursor By default, you can move the cursor from Monitor 1 to Monitor 2 by
behavior to moving the mouse to the right. If your Monitor 2 is located to the left
match monitor of Monitor 1, use this setting to configure your cursor to move to
orientation. Monitor 2 by moving the mouse to the left.
This option is available only when two monitors are connected to
your system.
Configuration.
Polycom, Inc.