Polycom CX7000 series Administrator's Manual page 10

Administrator's Guide for Polycom CX7000 Systems
6
Setting
Obtain DNS server
address automatically
Use the following
DNS server address
Preferred DNS server
Alternate DNS server
On the System page, specify the sign-in mode to use when the system
5
signs in to the Lync server. The sign-in mode you choose determines the
settings available on the System page.
Configure the settings on the System page for the sign-in mode you
6
chose.
— To use Standalone sign-in mode, configure these settings.
Setting
Lync Sign-in Address
User Name
Password
Specify Lync server
Lync Server Name
Specify time server
Time Server Name
Install certificate from
USB drive
Description
Specifies that the system gets a DNS address automatically.
Specifies that the DNS address is not assigned automatically.
Specifies the DNS address to use for this system.
Specifies an alternate DNS address to use for this system.
Description
Lets you specify the Lync address for the system.
Lets you enter the user name for the Lync account
assigned to this system.
Lets you enter the password for the Lync account
assigned to this system.
Lets you choose whether to enter the Lync Server name
manually.
Specifies the Lync server to use.
Lets you choose to enter the time server name or IP
address manually.
If you do not specify a time server name or address, the
system first attempts to use DNS SRV to find the time
server address and then attempts to use
time.windows.com as the time server.
Specifies the time server to use.
Lets you install a Root CA certificate.
To install CA certificates on systems using Standalone
Sign-in mode:
1 Create a folder named certchain on a USB drive,
and copy the certificates to that folder.
2 Go to the System settings page, and attach the
USB drive to the system.
3 Choose Install certificate from USB drive.
Polycom, Inc.