Mitsubishi Electric FR-F820-00046 Instruction Manual page 116

Pr. Pr. group Name
Terminal 2
frequency
125 T022
setting gain
frequency
Terminal 4
frequency
126 T042
setting gain
frequency
User group read
160 E440
selection
PM parameter
998 E430
initialization
Automatic
999 E431 parameter
setting
*1 Initial value for the FR-F820-00046(0.75K) or lower and FR-F840-00023(0.75K) or lower.
*2 Initial value for the FR-F820-00077(1.5K) to FR-F820-00167(3.7K) and the FR-F840-00038(1.5K) to FR-F840-00083(3.7K).
*3 Initial value for the FR-F820-00250(5.5K), FR-F820-00340(7.5K), FR-F840-00126(5.5K), and FR-F840-00170(7.5K).
*4 Initial value for the FR-F820-00490(11K) to FR-F820-01540(37K), FR-F840-00250(11K) to FR-F840-00770(37K).
*5 Initial value for the FR-F820-01870(45K), FR-F820-02330(55K), FR-F840-00930(45K), and FR-F840-01160(55K).
*6 Initial value for the FR-F820-03160(75K) or higher and FR-F840-01800(75K) or higher.
*7 For the FR-F820-02330(55K) or lower and FR-F840-01160(55K) or lower.
*8 For the FR-F820-75K(03160) or higher and FR-F840-75K(01800) or higher.
*9 Initial value for the FR-F820-00340(7.5K) or lower and FR-F840-00170(7.5K) or lower.
*10 Initial value for the FR-F820-00490(11K) or higher and FR-F840-00250(11K) or higher.
*11 The initial value in "FM" column is for the FM-type inverter that has terminal FM, and that in "CA" column is for the CA-type inverter that has
terminal CA.
*11
Initial value
Increment
FM CA
0.01 Hz 60 Hz 50 Hz 0 to 590 Hz
0.01 Hz 60 Hz 50 Hz 0 to 590 Hz
1 9999 0 0, 1, 9999
0, 12, 112,
1 0 8009, 8109,
9009, 9109
1, 2, 10, 11,
1 9999 12, 13, 20,
21, 9999
Range Application
Allows the frequency at the maximum
potentiometer setting (5 V in the initial setting)
to be changed.
Allows the frequency at the maximum current
input (20 mA in the initial setting) to be
changed.
This function restricts the parameters that are
read by the operation panel and parameter
unit.
Selects the PM motor control and set the
parameters that are required to drive a PM
motor.
Changes parameter settings as a batch. The
target parameters include communication
parameters for the Mitsubishi Electric human
machine interface (GOT) connection and the
parameters for the rated frequency settings of
50/60 Hz.
4.4 Frequently-used parameters (simple mode parameters)
Refer
to
1
page
126,
339
2
128,
339
3
204
4
174
5
200
6
7
8
9
10
115
4. BASIC OPERATION