Settings Required To Use Network Twain Scanner - Ricoh Aficio 8060 Operating Instructions Manual

Reference
p.49 "Interface Settings"
p.56 "File Transfer"

Settings Required to Use Network TWAIN Scanner

This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
an Ethernet connection.
For details about specifying the settings, see "Interface Settings" and "File
Transfer".
Heading
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network LAN Type
Interface Settings/Network Ethernet Speed
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL / TLS Communication
Interface Settings/Network Host Name
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. When both Ethernet and wireless LAN (IEEE 802.11b) are connected,
the selected interface takes precedence.
Reference
p.49 "Interface Settings"
p.56 "File Transfer"
Setting Item
Network Settings
Setting Requirements
Necessary
As required
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
As required
1
25