Connecting The Machine; Connecting To The Interfaces - Ricoh Aficio 8060 Operating Instructions Manual

1. Connecting the Machine

This chapter describes how to connect the machine to the network and specify
the network settings.

Connecting to the Interfaces

This section describes how to identify the machine's interface and connect the
machine according to the network environment.
R CAUTION:
• A network interface cable with a ferrite core must be used for RF interfer-
ence suppression.
1.
IEEE 1284 port (optional)
Port for connecting the IEEE 1284 inter-
face cable.
2.
10BASE-T/100BASE-TX port
Port for connecting the 100BASE-TX or
10BASE-T cable.
Port for connecting the 1000BASE-T,
100BASE-TX or 10BASE-T cable when
the Gigabit Ethernet (Optional) is in-
stalled.
AMC004S
3.
USB 2.0 port
Port for connecting the USB 2.0 interface
cable.
4.
Wireless LAN port (optional)
Port for using the wireless LAN.
Note
❒ You cannot install two or more of the
options below: IEEE 1284 interface
board, IEEE 802.11b wireless LAN.
5