Table of Contents
Advertisement
Copier/Document Server Features
User Stamp
This section describes the user tools in the User Stamp menu under Stamp.
Default settings are shown in bold type.
❖ Program / Delete Stamp
You can register, change, or delete these designs as user stamps.
You can register up to four custom stamps with your favourite designs.
❖ Stamp Format: 1, Stamp Format: 2, Stamp Format: 3, Stamp Format: 4
3
You can specify how each of registered User Stamps 1 to 4 is printed.
• Stamp Position
You can specify where to print the User Stamp.
The default setting is Top Right.
• Stamp Position
You can adjust the position of the User Stamp within the available range
as shown below.
Metric version:
• "Top Left"...T/B: 4-144mm, L/R: 4-144mm
• "Top Center"...T/B: 4-144mm, L/R: 72-72mm
• "Top Right"...T/B: 4-144mm, L/R: 4-144mm
• "Center Left"...T/B: 72-72mm, L/R: 4-144mm
• "Center"...T/B: 72-72mm, L/R: 72-72mm
• "Center Right"...T/B: 72-72mm, L/R: 4-144mm
• "Bottom Left"...T/B: 4-144mm, L/R: 4-144mm
• "Bottom Center"...T/B: 4-144mm, L/R: 72-72mm
• "Bottom Right"...T/B: 4-144mm, L/R: 4-144mm
Inch version:
• "Top Left"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Top Center"...T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• "Top Right"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Center Left"...T/B: 2.8"-2.8", L/R: 0.1"-5.7"
• "Center"...T/B: 2.8"-2.8", L/R: 2.8"-2.8"
• "Center Right"...T/B: 2.8"-2.8", L/R: 0.1"-5.7"
• "Bottom Left"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Bottom Center"...T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• "Bottom Right"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
The default setting is All Pages.
98
Advertisement
Table of Contents
