Settings Required To Use Scan To Folder Function - Ricoh Aficio 8060 Operating Instructions Manual

Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒ When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.49 "Interface Settings"
p.56 "File Transfer"

Settings Required to Use Scan to Folder Function

This section lists the settings required for sending files.
Ethernet
This section lists the settings required for sending files with an Ethernet connec-
tion.
For details about specifying the settings, see "Interface Settings" and "File
Transfer".
Heading
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network Ethernet Speed
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL / TLS Communication
Interface Settings/Network Host Name
File Transfer
File Transfer
Setting Item
Scanner Resend Interval Time
Number of Scanner Resends
Network Settings
Setting Requirements
Necessary
Necessary
As required
As required
As required
As required
Necessary
As required
Necessary
As required
As required
As required
As required
As required
1
21