Table of Contents
Advertisement
Facsimile Features
Reception Settings
This section describes the user tools in the Reception Settings menu under Fac-
simile Features.
❖ Switch Reception Mode
Specify the method for receiving fax documents.
The default setting is Auto Reception.
❖ Program Special Sender
By programming particular receivers as Special Sender in advance, you can
have Special Senders treated differently.
For details about how to program Special Sender, see "Special Senders to
Treat Differently".
4
❖ Program Special Sender: Print List
You can print the Special Sender List.
A
Press [Facsimile Features].
B
Press [Reception Settings].
C
Press [Program Special Sender: Print List].
Press the {Start} key.
D
To cancel printing a list before pressing the {Start} key, press [Cancel] or the
{Clear/Stop} key.
Press the {User Tools/Counter} key.
E
❖ Forwarding
Specify whether or not received fax documents are to be forwarded to a pro-
grammed receiver.
The default setting is Off.
❖ Reception File Setting
Selects whether received documents are saved on the hard disk to be printed
later or printed immediately without being saved.
The default setting is Print.
For details about Reception File Setting, see "Reception File Setting".
124
Advertisement
Table of Contents
