Date Stamp - Ricoh Aficio 8060 Operating Instructions Manual

Reference
"User Stamp", Copy/ Document Server Reference

Date Stamp

This section describes the user tools in the Date Stamp menu under Stamp.
Default settings are shown in bold type.
❖ Format
You can select the date format for Date Stamp mode.
The default setting is DD / MM / YYYY (Metric version) / MM / DD / YYYY
(Inch version).
❖ Font
You can select the Date Stamp font.
The default setting is Font 1.
❖ Size
You can set the Date Stamp size.
The default setting is Auto.
❖ Superimpose
You can have the Date Stamp printed in white when it overlaps black parts of
the image.
The default setting is Off.
❖ Stamp Setting
You can specify how Date Stamp is printed.
• Stamp Position
You can specify where to print the Date Stamp.
The default setting is Top Left.
• Stamp Position
You can adjust the position of the Date Stamp within the available range
as shown below.
Metric version:
• "Top Left"...T/B: 4-144mm, L/R: 4-144mm
• "Top Center"...T/B: 4-144mm, L/R: 72-72mm
• "Top Right"...T/B: 4-144mm, L/R: 4-144mm
• "Bottom Left"...T/B: 4-144mm, L/R: 4-144mm
• "Bottom Center"...T/B: 4-144mm, L/R: 72-72mm
• "Bottom Right"...T/B: 4-144mm, L/R: 4-144mm
Stamp
3
99