Edit - Ricoh Aficio 8060 Operating Instructions Manual

Copier/Document Server Features

Edit

This section describes the user tools in the Edit menu under Copier/Document
Server Features.
Default settings are shown in bold type.
Enter the width of the binding margin with the number keys as follows:
• Metric version: 0–30 mm (in increments of 1 mm)
• Inch version: 0"-1.2" (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
3
• Metric version: 2–99 mm (in increments of 1 mm)
• Inch version: 0.1"-3.9" (in increments of 0.1 inch)
An image of approximately 1.5 mm (0.06") will not be displayed as the width of
the separation line, when specifying solid or broken lines.
❖ Front Margin: Left / Right
You can specify left and right margins on the front side of copies in Margin
Adjustment mode.
The default setting is Left, 5 mm (Metric version) / Left, 0.2" (Inch version).
❖ Back Margin: Left / Right
You can specify left and right margins on the back side of copies in Margin
Adjustment mode.
The default setting is Right, 5 mm (Metric version) / Right, 0.2" (Inch ver-
sion).
❖ Front Margin: Top / Bottom
You can specify top and bottom margins on the front side of copies in Margin
Adjustment mode.
The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).
❖ Back Margin: Top / Bottom
You can specify top and bottom margins on the back side of copies in Margin
Adjustment mode.
The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).
❖ 1 Sided→2 Sided Auto Margin: TtoT
In 1 sided to 2 sided Duplex mode, you can specify the margins on the back
side.
The margin is set to the same value of "Back Margin: Left / Right".
The default setting is Right, 5 mm (Metric version) / Right, 0.2" (Inch ver-
sion).
❖ 1 Sided→2 Sided Auto Margin: TtoB
In 1 sided to 2 sided Duplex mode, you can specify the margins on the back
side.
The value set for "Back Margin: Top / Bottom" is used.
The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).
92