Description Of Status Words And Actual Values - Siemens Sinamics S120 Function Manual

Communication
10.1 Communication according to PROFIdrive
Bit Meaning
Note:
This bit should not be set "1" until PROFIdrive has returned an appropriate status via E_ZSW_BM.9 = "1".
11...1 Reserved
4
15 Controller sign of life toggle bit
M_ADD
Supplementary torque with telegram 220 (metal industry).
M_LIM
Torque limit with telegram 220 (metal industry).
Not available in V/f control mode.
M_VST
The summed precontrol value is transferred via this setpoint:
● Dynamic M setpoint + (quasi) steady-state M setpoint
10.1.2.4

Description of status words and actual values

Note
This chapter describes the assignment and meaning of the process data in SINAMICS
interface mode (p2038 = 0).
The reference parameter is also specified for the relevant process data. The process data
are generally normalized in accordance with parameters p2000 to r2004.
The following scalings apply:
• a temperature of 100°C corresponds to 100 %
• an electrical angle of 90° also corresponds to 100 %.
532
Remarks
0 No master control by PLC
Process data transferred via PROFIdrive are
rejected - i.e. assumed to be zero.
- -
1 Toggle bit communication active
0 Toggle bit communication not active
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
Parameter
-
r2081.15
Drive functions