Siemens Sinamics S120 Function Manual page 56

Extended setpoint channel
2.5 Jog
Parameterization with STARTER
In the STARTER commissioning tool, the "Motorized potentiometer" parameter screen in the
project navigator under the relevant drive is activated by double-clicking Setpoint channel →
Motorized potentiometer .
2.5 Jog
Description
This function can be selected via digital inputs or via a field bus (e.g. PROFIBUS). This
means that the setpoint is specified via p1058[0...n] and p1059[0...n].
When a jog signal is present, the motor is accelerated to the jog setpoint with the
acceleration ramp of the ramp-function generator (referred to the maximum speed p1082;
see diagram "Function chart: jog 1 and jog 2"). After the jog signal has been deselected, the
motor is decelerated via the set ramp of the ramp-function generator.
CAUTION
The "Jog" function is not PROFIdrive-compliant!
Figure 2-2
54
Function chart: jog and OFF1
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
Drive functions