Siemens Sinamics S120 Function Manual page 137

Example 1
MT_STW = 100H: a search is only made for rising edges, probe 1
Figure 3-28
In the DP cycle, all time stamps for rising edges are transferred corresponding to their
sequence in time for probe 1.
Example 2
MT_STW = 101H: a search is made for rising and falling edges for probe 1
Figure 3-29
In the DP cycle, all time stamps for rising and falling edges are transferred corresponding to
their sequence in time for probe 1.
Drive functions
Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2
a search is made for rising edges for probe 1
a search is made for rising and falling edges for probe 1
Servo control
3.19 Central probe evaluation
135