Built-In Panel Function List - Roland MDX-50 User Manual

Part
OVER
RIDE
MENU
Z0
SENSE
PAUSE/
CANCEL
ENTER

Built-in Panel Function List

CAUTION: Never operate the built-in panel and VPanel simultaneously.
Function
"Using Hand-wheel Operations to Move the Tool Bur (Hand-wheel Feed)"
"Quickly Moving to a Specific Position"
"Changing the Coordinate System"
"Starting and Stopping Spindle Rotation"
"Setting the Origin"
"Setting the Z Origin Using the Z0 Sensor"
"Operation of the Tool Bur Replacement Function (Auto Tool Changer)"
"How to Set Overrides"
"Checking Job/Tool Bur Information during Cutting"
"Pausing/Resuming/Canceling Cutting"
"Recovering from Errors"
"Turning Off the Status Lights during Cutting"
"Changing the Blower Strength during Cutting"
Name Details
Override key Select the feeding speed override and
the spindle rotating speed override.
Menu key Call up the submenu.
Z0 sensor key Use this key when you use a Z0 sensor
to set the Z origin.
Pause/cancel Pauses and resumes cutting. When
key you press this key with cutting paused,
you will be given the option of resum-
ing or canceling cutting.
Enter key Confirms operations.
Hand-wheel Set the hand-wheel feed for each axis
and increase/decrease setting values.
Built-in Panel Screen and Functions
Notation used in this
docuRment
[OVER RIDE]
[MENU]
[Z0 SENSE]
[PAUSE/CANCEL]
[ENTER]
Page
P.41
P.42
P.43
P.44
P.44
P.44
P.45
P.46
P.46
P.47
P.48
P.49
P.49
1. Built-in Panel Operation (Basic)
5