Roland MDX-50 User Manual page 38

Periodic Maintenance
D
Close the front cover.
E
Press [ENTER].
2.
Perform automatic correction.
A
Display VPanel.
" P. 7 "Displaying VPanel"
B
Click , the [Correction] tab, and then click [Automatic correction].
The VPanel "Automatic correction" dialog box appears.
C
Select the [Magazine] check box, and then click [Start Correction].
You can use the [Rotary axis unit] check box when you are using the optional rotary axis unit.
Automatic correction starts.
D
When the window shown in the following figure appears, click [OK].
E
Once automatic correction is complete, return the detection pin to the ATC magazine.
36
4. Maintenance