Operation Of The Tool Bur Replacement Function (Auto Tool Changer) - Roland MDX-50 User Manual

Operation of the Tool Bur Replacement Function (Auto Tool Changer)

You can use the built-in panel to switch tool burs. This operation is not possible in the following cases.
When the front cover or dust box cover is open
When cutting is paused and during cutting
Procedure
A
Press [MENU] several times to display the following screen.
B
Turn the hand-wheel to select the function.
Move the
select the function.
Display
Tool Bur 1 to Tool Bur 6
Return Tool Bur
Forced Release
C
Press [ENTER].
The machine operates. Press [MENU] several times to return to the top window.
mark to
Function
Obtain the tool bur of the selected number. If a tool bur with a different number
from the selected one is currently being held, the held tool will be returned,
and then the selected tool bur will be obtained.
Return the tool bur to the magazine.
The retained tool bur is released above its stocker. Follow the messages displayed
on the built-in panel to take action accordingly.
5. Built-in Panel Operation (Practical Use)
Built-in Panel Functions
45