Periodic Maintenance; Situations Requiring Maintenance; Replacing Consumable Parts - Roland MDX-50 User Manual

Periodic Maintenance

Situations Requiring Maintenance

When installing the machine
When replacing the spindle unit
When the machine has not been used for a pro-
longed period
Before cutting on days when the ambient tem-
perature is low
When moving the machine to a different installa-
tion site
When ATC tool burs cannot be held
Once a month
When the working time of the spindle exceeds
200 hours

Replacing Consumable Parts

Part name
Spindle unit
Collet
Replacement time/Guideline
When the working time of the spindle exceeds 2,000 hours (with slight varia-
tion depending on the work situation).
You can use VPanel to view the working time of the spindle.
" P. 55 ""Maintenance" Tab"
* The replacement spindle unit comes with a collet and belt.
If the collet is deformed.
If an overload error or other error occurs, the collet may be deformed.
P. 34 "Spindle Run-in (Warm-up)"
P. 35 "Correcting the Cutting Machine (Auto-
matic Correction)"
P. 34 "Spindle Run-in (Warm-up)"
P. 35 "Correcting the Cutting Machine (Auto-
matic Correction)"
P. 37 "Retightening the Collet"
4. Maintenance
33