Settings" Dialog Box; Preferences" Tab; Machine" Tab - Roland MDX-50 User Manual

"Settings" Dialog Box

Click on the top window to display the "Settings" dialog box. You can use this dialog box to configure the operation
settings of the connected machine. When the machine is offline, you can only select the "Environment", "Maintenance", and
"Notification" tabs.

"Preferences" Tab

You can use this tab to set the language and units that are displayed in VPanel.
Unit
Language

"Machine" Tab

You can use this tab to configure settings related to VPanel auto-startup and NC codes. You cannot select this tab when the
machine is offline.
Command set
Select the unit to use for coordinate values and lengths.  Initial setting: Millimeters
Select the language to display on the screen. After you select the language, restart
VPanel to enable this setting.
Select the command set.
 Initial setting: Automatic switching between RML-1 and NC code
RML-1 Select this option when using the software included with this
machine.
NC code Select this option when you want to use NC codes.
For details on NC codes, see P. 88 "NC Code Specifications"
and the "NC Code Reference Guide" (electronic-format manual)
included with this machine.
Selected Select this option to enable this machine to receive cutting
automatically programs that use either the RML-1 or NC code command set.
(RML-1/ NC
code)
Click this button to display the "NC code setting" dialog box.
Use this dialog box to configure NC code settings. This button is
NC code set-
only enabled when "NC code" or "Automatic switching between
ting
RML-1 and NC code" is selected.
P. 58 ""NC code setting" Dialog Box"

P. 8 "Exiting VPanel"
6. VPanel Operation (Practical Use)
51