Starting And Stopping Spindle Rotation; Setting The Origin; Setting The Z Origin Using The Z0 Sensor - Roland MDX-50 User Manual

Built-in Panel Functions

Starting and Stopping Spindle Rotation

You can start and stop spindle rotation as well as specify the spindle's rotation speed. You cannot perform this operation
during cutting.
WARNING
Procedure
A
Press [MENU] several times to display the following screen.
B
Press [SPINDLE].
Tap: Specify the rotation speed.
Hold down (for 1 second): Start or stop the spindle rotation.
When the
can specify the rotation
speed.
C
Turn the hand-wheel.
The spindle rotating speed changes.
When the triangle mark ( ) lights next to "S," operation is possible.

Setting the Origin

" P. 22 "Step 4 : Setting the XY Origin"
" P. 24 "Step 5 : Setting the Z Origin (Using the Z0 Sensor)"

Setting the Z Origin Using the Z0 Sensor

" P. 24 "Step 5 : Setting the Z Origin (Using the Z0 Sensor)"
44
5. Built-in Panel Operation (Practical Use)
This procedure makes the machine operate.
Before you perform this procedure, check to make sure that operation of the machine will
not create any hazard or danger.
mark is lit, you