Cutter Management" Dialog Box - Roland MDX-50 User Manual

"Cutter management" Dialog Box

Click on the top window to display the "Cutter management" dialog box.

"Cutter management" Dialog Box

By using this dialog box to select tool burs to be used, the work time of the selected tool burs will be recorded automatically.
In addition, when the bur reaches the preset replacement time, a warning message will be displayed.
Register tool bur information to match the machine's ATC magazine stocker numbers.

No.
Stocker number
Click
has been loaded in a stocker to display the name on the VPanel top window. However, you
cannot select or change tool burs from the Cutter management screen for the stocker whose
tool bur currently holds the spindle.
Also, the "Work time" will not be counted if you do not select a tool bur.

Cutter
Displays the work time and replacement time of the selected tool bur. When the bur reaches
Work time/Re-
the preset replacement time, a warning message will be displayed. Click "Cutter registration"
placement time
to change the replacement time.

Reset After replacing the tool bur with a new one, click [Reset] to set the work time to "0."
Click this button to register a tool bur whose work time you want to manage or to remove burs
Cutter registra-
you no longer want to manage. The "Cutter registration" dialog box appears.
tion

P. 64 ""Cutter registration" Dialog Box"
to display the tool burs that have been registered. Select the name of a tool bur that
P. 64 ""Cutter registration" Dialog Box"
P. 64 ""Cutter registration" Dialog Box"
P. 64 ""Cutter registration" Dialog Box"
Tool bur information
6. VPanel Operation (Practical Use)
63