Cutting (One Side Cutting) - Roland MDX-50 User Manual

3. Cutting (One Side Cutting)

Performing an Emergency Stop on This Machine ... 12
Emergency Stop ....................................................................12
Emergency Stop or Pause Due to Opening or Closing the Cover ..13
Emergency Stop Due to Opening or Closing the Cover ........13
Pause Due to Opening or Closing the Cover.........................14
Machine Statuses Indicated by Status Light Color ..15
What Is the Status Light?.......................................................15
1. Checking the Cutting Area ..............................16
Cuttable Workpiece (Cutting Material) Size ...........................16
2. Items Necessary for Cutting ...........................17
Cutter .....................................................................................17
Workpiece (Cutting Material) .................................................17
Scrap Board ...........................................................................17
3. Cutting ............................................................18
Step 1 : Preparing the Tool Bur ..............................................18
Step 2 : Loading the Tool Bur on the Machine .......................20
Step 3 : Mounting the Workpiece on the Machine .................21
Step 4 : Setting the XY Origin ................................................22
Step 5 : Setting the Z Origin (Using the Z0 Sensor) ..............24
Step 6 : Outputting Cutting Data ............................................27
Adjusting the Feeding Speed/Spindle Rotating Speed during Cutting ..28
11