Retightening The Collet - Roland MDX-50 User Manual

Retightening the Collet

Continuous cutting will cause the collet to become loose, making it easy for the tool bur to come off. Periodically retighten
the collet.
Recommended Interval for This Work
Once a month, or when the working time of the spindle exceeds 200 hours since the previous retightening
(with slight variation depending on the work situation).
" P. 60 ""Spindle maintenance" Dialog Box"
Required Items
Detection pin
1.
Open the collet.
A
Remove the workpiece and return the tool bur to the ATC magazine.
" P. 45 "Operation of the Tool Bur Replacement Function (Auto Tool Changer)"
B
Clean off any cutting waste around the spindle.
" P. 31 "Cleaning after Cutting Finishes"
C
Display VPanel.
" P. 7 "Displaying VPanel"
D
Click and then the [Maintenance] tab.
The VPanel "Maintenance" tab appears.
E
Click [Open collet].
Wrench Cloth for care
Periodic Maintenance
4. Maintenance
37