Overview; System Requirements And System Configuration - Omron G9SP-N20S Operation Manuals

Overview

5-1

Overview

5-1-1

System Requirements and System Configuration

System Requirements
System Configuration
68
The G9SP Configurator is a software application that is used to initialize, pro-
gram, monitor, and debug G9SP-series Controller. This section describes the
features of the G9SP Configurator and its system requirements.
The following system is required to operate the G9SP Configurator. Make
sure your system provides the following conditions and has the necessary
components.
Item
CD-ROM or DVD- One or more
ROM drive
Supported operating Windows XP SP3 (32-bit edition), Windows Vista SP2 (32-bit edi-
systems tion or 64-bit edition), Windows 7 (32-bit edition or 64-bit edition),
Windows 8 (32-bit edition or 64-bit edition), Windows 8.1 (32-bit
edition or 64-bit edition), or Windows 10 (32-bit edition or 64-bit
edition)
Note Administrator rights are required for installation.
CPU A computer with a processor recommended by Microsoft Corpo-
ration.
RAM The memory capacity recommended by Microsoft Corporation.
Required hard disk 200 MB min.
space
Display High-brightness display of 800 x 600 SVGA min.
256 colors min.
Connection port to USB port
Controller
The G9SP Configurator is installed on a computer and connected to the
G9SP-series Controller with a commercially available USB cable.
USB port
Type-A connector
Commercially
available USB cable*1
Peripheral USB port
(USB 1.1, B-type connector)
Description
G9SP Configurator
Type-B connector
G9SP-series Controller
*1: The USB cable must be 3 m or shorter.
Section 5-1