Overview - Omron SYSMAC NJ Series Network Connection Manual

4．Overview

4. Overview

This guide describes procedures for connecting an HMS Anybus X-gateway EtherNet/IP
Adapter (hereinafter referred to as the "X-gateway") and an OMRON NJ/NX-series Machine
Automation Controller (hereinafter referred to as the "Controller") via EtherNet/IP and for
checking their communication status.
Refer to Section 6. EtherNet/IP Settings and Section 7. EtherNet/IP Connection Procedure to
understand setting methods and key points to operate EtherNet/IP tag data links.
4