Overview
6-1
Overview
G9SP Configurator Screen
Basic Workflow
80
Configuration data for the G9SP-series Controller is created using the G9SP
Configurator.
Project Window:
This window serves as the basis for
all operations on the G9SP Configurator.
Output Window:
This window displays the results of
operations performed on the
G9SP Configurator.
Configuration data for the G9SP-series Controller is created basically using
the following workflow.
1. Starting the G9SP Configurator.
2. Hardware setup (e.g., selecting I/O devices to connect in the unit configu-
ration)
3. Programming
4. System settings
5. Displaying and printing reports
6. Designing device security
7. Desktop debugging (i.e., analysis and offline simulation using searches)
Function Block List Window:
This window displays a list of the function
blocks that can be used in the program.
Program Window:
This window is where programs are created.
I/O Tag List Window:
This window displays a list of I/O tags
that can be used in the program.
Section 6-1
Operation Guide Window:
This window displays information
on startup procedures for the
G9SP-series Safety Controllers.