Offline Simulation; Basic Procedure - Omron G9SP-N20S Operation Manuals

Offline Simulation

6-4 Offline Simulation
Note
6-4-1

Basic Procedure

Starting Simulation
1,2,3...
Executing Simulation
1,2,3...
The operation of the G9SP-series Controller's programming can be checked
by performing simulation on a computer.
You can change the values of any input tags to simulate
the operation of the program.
Simulation cannot be used during online monitoring. Disconnect the online
connection before starting simulation.
This section describes the basic procedure for simulation.
1. Check that the G9SP Configurator is offline
2. Click the Start Simulation Icon
dow will turn pink.
1. Click the Program Operation Icon
2. Debug the program by selecting the desired I/O tag and then clicking the
Set Icon , Reset Icon
•Run/stop
Start and stop
•Set/reset/reverse
simulation.
Time Chart
A time chart can be used to check
operation for a previously set input
pattern.
.
. The background of the Program Win-
.
, and Reverse Icon .
Section 6-4
93