Installation - Omron G9SP-N20S Operation Manuals

Installation

4-1-3 Installation
Dimensions and Installation Height
Dimensions
Installation Height
Installation Methods
DIN Track Installation
Surface Installation
This section describes how to install the G9SP-series Controller.
A
B
110 100 90
Model number
G9SP-N10S 86
G9SP-N10D 130
G9SP-N20S 130
The installation height is approximately 90 mm.
When a Connecting Cable is connected to an Option Board, however, the
additional height must be included. Always allow for the additional height
when considering the depth of the control panel in which the G9SP-series
Controller is to be mounted.
There are two installation methods.
The Units can be mounted to PEP-50N (50 cm) or PEP-100N/100N2 (100
cm) DIN Tracks. Secure the DIN Track with screws in at least three places.
DIN Track
Secure with screws
Units can be directly mounted in the control panel using M4 screws.
Four, 4.5 dia.
A B
76 290 g max.
120 440 g max.
120 430 g max.
Section 4-1
85
81
8
Weight
59