Expansion I/O Units; Part Names And Indicators - Omron G9SP-N20S Operation Manuals

Expansion I/O Units

2-2 Expansion I/O Units
2-2-1

Part Names and Indicators

Part Names and Functions
Standard I/O Units with 20 I/O Points (CP1W-20EDT/20EDT1)
Standard Output Units with 32 I/O Points (CP1W-32ET/ET1)
40
This section provides the names of Expansion I/O Unit parts, I/O specifica-
tions, and terminal arrangements. Refer to 4-1 Installation and 4-2 Wiring for
dimensions and weights.
1. Input terminals
2. Expansion I/O connecting cable
3. Output terminals
3. Output terminals
2. Expansion I/O connecting cable
3. Output terminals
Number Name
1 Input terminals
2 Expansion I/O
connecting cable
3 Output terminals
4 Input indicators
5 Expansion con-
nector
6 Output indicators
4. Input indicators
5. Expansion connector
20EDT1
6. Output indicators
6. Output indicators
32ET
Function
Used to connect input devices.
This cable is used to connect the adjacent Units,
including the G9SP-series Controller, Expansion I/O
Units, or Expansion Units. For extended connections
or vertical arrangements, use the CP1W-CN811 I/O
Connecting Cable (length: 800 mm).
Used to connect output devices.
Input status is displayed. An indicator will be ON when
the input is ON.
CP-series Expansion I/O Units can be connected.
1-1-2 Basic System and Configuration Devices
2-2 Expansion I/O Units
Output status is displayed. An indicator will be ON
when the output is ON.
Section 2-2
5. Expansion connector